Evaluasi Functional Suitability, Performance Efficiency, Usability, dan Portability Berdasarkan ISO 25010 pada Aplikasi VR Gamelan Slenthem
DOI:
https://doi.org/10.24002/konstelasi.v3i1.6620Keywords:
evaluasi, kualitas, aplikasi, virtual reality, ISO 25010Abstract
Abstrak. Penelitian ini dilakukan dengan tujuan untuk menjamin kualitas dari aplikasi VR Gamelan Slenthem agar menghindari error serta menjamin berjalannya seluruh fungsi yang terdapat di dalamnya dengan menggunakan standar ISO 25010 selama pengujiannya. Aplikasi ini diharapkan dapat menjadi sarana pembelajaran alat musik gamelan, khususnya slenthem. Pengujian dilakukan pada 4 karakteristik berdasarkan pada standar ISO 25010 yaitu functional suitability, performance efficiency, usability, serta portability. Berdasarkan pengujian yang telah dilakukan, aplikasi VR Gamelan Slenthem ini dapat disimpulkan memenuhi standar ISO 25010 dengan nilai karakteristik functional suitability 1 (baik), karakteristik usability 93% (sangat layak), karakteristik performance efficiency 80% (layak), dan karakteristik portability yang baik. Hasil penelitian ini diharapkan dapat menjadi rekomendasi dalam pengembangan selanjutnya demi meningkatkan kualitas aplikasi VR Gamelan Slenthem.
Abstract. The aim of the research was to ensure the quality of VR Gamelan Slenthem application to avoid errors and ensure the operation of all the functions in the application by using ISO 25010 standard. Hopefully, this application can be a learning tool for gamelan musical instruments, especially slenthem. Testing was conducted using 4 characteristics of ISO 25010 that were functional suitability, performance efficiency, usability, and portability. Based on the testing, VR Gamelan Slenthem application can be concluded that it meets ISO 25010 standard with the functional suitability characteristic of 1 (good), usability characteristic of 86.16% (excellent), performance efficiency characteristic of 80% (adequate), and good portability characteristic. The result of this study can be used as a recommendation for further development to improve the quality of the VR Gamelan Slenthem application.
References
E. S. Soegoto, & C. Chandra, “Building Concept of High School Information Technology,” IOP Conference Series: Materials Science and Engineering, 407(1), pp. 012022, 2018.
S. A. Bhat, “The Positive and Negative Impact of New Technology on Accelerated Learning during Covid-19 Pandemic,” International Journal of Applied Research, 2021.
A. Harista, S. R. U. Aldo Sompie, S. D. E. Paturusi, “Learning Application for Introduction of Javanese Gamelan Musical Instruments Based on Android Platform,” Jurnal Teknik Informatika, vol. 17, no. 1, Januari-Maret 2022.
F. G. Purnomo, “Pengaruh Kualitas Produk, Persepsi Harga Dan Promosi Terhadap Keputusan Pembelian Produk Gamelan Siswosumartan Di Surakarta,” Skripsi thesis, Universitas Muhammadiyah Surakarta, 2022.
D. Allcoat, T. Hatchard, F. Azmat, “Education in the Digital Age: Learning Experience in Virtual and Mixed Realities,” Journal of Educational Computing Research, vol. 59, no. 5, 2021.
F. T. Moura, “Telepresence: The Extraordinary Power of Vitual Reality,” musicstats.org, 2017.
M. Melatti and K. Johnsen, “Virtual Reality mediated instruction and learning,” 2017 IEEE Virtual Reality Workshop on K-12 Embodied Learning through Virtual & Augmented Reality (KELVAR). IEEE, 2017.
G. A. Farsi, A. B. M. Yusof, A. Romli, “A Review of Virtual Reality Applications in Educational Domain,” International Journal of Interactive Mobile Technologies, vol. 15, no. 22, 2021.
A. R. Srinivasa, R. Jha, T. Ozkan, Z. Wang, “Virtual reality and its role in improving student knowledge, self-efficacy, and attitude in the materials testing laboratory,” International Journal of Mechanical Engineering Education, vol. 49, no. 4, 2021.
G. A. Farsi, A. B. M. Yusof, W J. B. Fauzi, “The Practicality of Virtual Reality Applications in Education: Limitations and Recommendations,” Journal of Hunan University (Natural Sciences), vol. 48, no. 7, 2021.
N. F. Naini, S. Santoso, T. S. Andriani, U. Claudia, Nurfadillah, “The Effect of Product Quality, Service Quality, Customer Satisfaction on Customer Loyalty,” Journal of Consumer Sciences, 2022.
D. A. Suryadi, E. Sulistiyani, “Evaluation of Information Quality Using ISO/IEC 25010:2011 (Case Research: Menu Harianku Application),” International Journal of Innovation in Enterprise System, vol. 06, no. 02, pp. 119-132, 2022.
E. Saputra, L. Y. Banowosari, “Quality Analysis of E-Office Application PT. KAI (Persero) Use Method ISO 25010,” International Research Journal of Advanced Engineering and Science, vol. 6, issue 1, pp.96-100, 2021.
M. Izzatillah, “Quality Measurement of Transportation Servis Application Go-Jek Using ISO 25010 Quality Model,” Jurnal SIMETRIS, vol. 10, no. 1, 2019.
E. Peters, G. K. Aggrey, “An ISO 25010 Based Quality Model for ERP Systems,” Advances in Science, Technology and Engineering Systems Journal, vol 5, no. 2, 578-583, 2020.
Y. S. M. Putra and R. Tanamal, “Analisis Usability Menggunakan Metode USE Questionnaire Pada Website Ciputra Enterprise System,” Teknika, 2020.
E. S. Rahman and D. Vitalocca, “Analisis Usabilitas Menggunakan Use Questionnaire Pada Sistem Informasi SMK Negeri 3 Makassar,” J. Mekom, 2018.
R. Firmansyah, “Usability Testing dengan USE Questionnaire pada Aplikasi SIPOLIN Provinsi Jawa Barat,” Swabumi, 2018.
Sugiyono, “Metode Penelitian Research and Development,” Bandung: Alfabeta, 2015.
A. Anal, S. Devadatta, “Assessing the Quality of M-Learning System using ISO/IEC 25010,” International Journal of Advanced Computer Research, vol. 3, no. 3, 2013.
D. Budiastuti, A. Bandur, “Validitas dan Reliabilitas Penelitian, Dilengkapi Analisis dengan NVIVO, SPSS, dan AMOS,” Jakarta: Mitra Wacana Media, 2018.
