PREDICTION OF DYNAMIC PARAMETERS OF STRUCTURES BASED ON MODAL ANALYSIS USING FDD

Authors

  • Ricky Priyatmoko
  • Yoyong Arfiadi

DOI:

https://doi.org/10.24002/jts.v15i2.3718

Abstract

Dynamic behavior and system identification are important topic in monitoring and maintaining existing infrastructures. System identification using Frequency Domain Decomposition (FDD) is an operational modal analysis (OMA) in frequency domain used on experiment of shear frame model with random vibration method is validated by comparing output of FDD data using acceleration input from simulated model with output of FDD using acceleration result of experimental model. The result of acceleration data is recorded using USB accelerometer X16-1D then calibrated and analyzed using Matlab programs, data_procces.m and solve FDD_eksperiment.m to estimate the modal parameter of model structure. Compared with parameter modal of simulation model, FDD method with input simulated acceleration resulted in difference of 1.757% in first frequency and 0.462% in second frequency. Meanwhile for FDD method using acceleration of experimental model, resulted in difference of 6.3126% in first frequency and 7.7327% in second frequency. FFD method is fairly accurate in predicting the frequency of structure, but for difference of mode shapes in experimental is very big compared to simulated model therefore it can be concluded that, this modal parameter is cannot be detected in experimental model.

References

Arfiadi, Y. (1996). “Pengembangan program bantu untuk analisis struktur dengan menggunakan Matlab”. Laporan Penelitian Program Studi Teknik Sipil-Fakultas Teknik, Universitas Atma Jaya Yogyakarta, Yogyakarta.

Arfiadi, Y. (2016). Analisis struktur dengan program matlab dan freeMat. Cahaya Atma Pustaka, Kelompok Penerbit Uni-versitas Atma Jaya Yogyakarta, Yogya-karta.

Arfiadi, Y. (2016). “Bahan kuliah Dinamika Struktur Lanjut”. Universitas Atma Jaya Yogyakarta, Yogyakarta.

Beskhyroun, S. and Ma, Q. (2012), “Low-cost accelerometers for experimental modal analysis”. Proceedings of 15th World Conference on Earthquake Engineering, Lisbon, Portugal.

Brincker, R. and Ventura, C. (2015), Intro-duction to operational modal analysis. Wiley, First edition.

Brincker, R. (2014). “Some elements of op-erational modal analysis”. Journal of Shock and Vibration, Vol. 2014, Article ID 325839.

Brincker, R., Zhang, L. and Andersen, P. (2000). “Modal identification of output-only systems using frequency domain decomposition in j. a. güemes (ed.)”. Proceedings of the European COST F3 Conference on System Identification & Structural Health Monitoring, 6-9 June, Universidad Politécnica de Madrid, Spain (pp. 273-282).

Chopra, A.K. (2011). Dynamics of structures theory and applications to earthquake engineering. Pearson Prentice Hall, 4th edition.

Cheynet, E. (2016). “Wind-induced vibra-tions of a suspension bridge: a case study in full-scale”. PhD Thesis, University of Stavanger.

Cheynet, E (2019). Automated frequency domain decomposition (AFDD) Matlab Code.

Ewins, D. J. (2000). “Modal Testing: Theory and Practices”. Research Studies Somerset, England.

Fadnes, T, O, M, (2017). “A full-scale study on traffic induced vibrations of a suspension bridge”. Master Thesis, Univer-sity of Stavanger.

Papoulis, A. (1991). Probability, random variable, and stochastic Processes. McGraw-Hill, 3rd edition.

Rainieri, C. and Fabbrocino, G. (2014). Op-erational modal analysis of civil engi-neering structures. First edition, Springer, London.

Schanke, A.S. (2015). “Operational Modal Analysis of Large Bridges”, Master The-sis, Departement of Civil and Enviro-mental Engineering, Norwegian Univer-sity of science and Technology.

Downloads

Published

2020-10-01

Issue

Section

Vol. 15, No. 2 April 2019