Improving Thermal Friction Drilling Performance of AISI 304 Stainless Steel Using the Harris Hawk Optimization Method
DOI:
https://doi.org/10.24002/ijieem.v6i2.7743Keywords:
machining process , maximation, minimization, optimization, resourcesAbstract
Presently, in friction drilling optimization schemes, quick convergence of solutions and simplicity of methods are still challenging. These issues are drawbacks in obtaining the maximum potential benefits from the optimization process. Therefore, this paper applies a new optimization method, Harris Hawk optimization to the thermal drilling process of AISI 304 stainless steel. The algorithm minimizes the axial force, determination error, radial force, and radial error and maximizes the bushing length as the major output of the process. The proposed approach was tested with experimental data obtained from the literature. The obtained results indicate that the optimal production is feasible. An example is given here of the results of the input parameters for the minimum axial force, which is as follows: After 500 iterations, the optimal axial force yields a tool cylindrical region diameter of 5.78593 mm, a friction angle of 60 degrees, a friction contact area ratio of 57.7082, workpiece thickness of 3 mm, feed rate of 140 mm/min and rotational speed of 3002.85 rpm, which can be applied. The results assist engineers in implementing optimal conditions for the drilling process. The outcome of this study strengthens decisions to establish thresholds of values that are less or more than expected thereby providing a basis for comparison, reward, and reprimand for workers. Thus the drilling process can be optimized.
References
Akpamukcu, M., Ates, A., & Akdag, O. (2023). Combination of electromagnetic field and harris hawk optimization algorithms with optimization to optimization structure and its application for optimum power flow. Journal of the Chinese Institute of Engineers, 46(7), 754-765.
Babu, P.V.K., & Swarnasri, K. (2020). Optimal integration of different types of DGs in radial distribution system by using Harris Hawk optimization algorithm. Cogent Engineering, 7(1), Article 1823156.
Bilgin, M. (2021). Minimum quantity lubrication and heat-assisted friction drilling of AA7075-T6 aluminum alloy. CIRP Journal of Manufacturing Science and Technology, 35, 819-829.
Dehghan, S., Soury, E., & Ismail, M. I. (2021). A comparative study on machining and tool performance in friction drilling of difficult-to-machine materials AISI304, Ti-6al-4V, Inconel718. Journal of Manufacturing Processes, 61, 128-152.
Dey, P., & Marungsri, B. (2024). Modified Harris hawk algorithm-based optimal photovoltagics for voltage stability and load flow analysis. International Journal of Green Energy, 21(10), 2378 -2392.
El-Bahloul, S. A, El-Shourbagy, H. E, Al-Makky, M. Y., & El-Midany, T. (2018). Thermal friction drilling: A review. 15th International Conference on Aerospace Sciences & Aviation Technology (ASAT – 15) May 28 – 30, 2013, Military Technical College, Kobry Elkobbah, Cairo, Egypt, Accessed on 17th December 2021.
El-Bahloul, S. A., El-Shourbagy, H. E., El-Bahloul, A. M., & El-Midany, T. T. (2018). Experimental and thermo-mechanical modeling optimization of thermal friction drilling for AISI 304 stainless steel. CIRP Journal of Manufacturing Science and Technology, 20, 84-92.
Heidari, A. A., Mirjalili, S., Faris, H., Aljarah, I., Mafarja, M., &Chen, M. (2019). Harris Hawks optimization: Algorithm and applications. Future Generation Computer Systems, 97, 849-872.
Jadhav, A., & Kumar, S. (2019). Laser cutting of AISI 304 material: An experimental investigation on surface roughness. Advances in Materials and Processing Technologies, 5(3), 439-437.
Jiao, S., Wang, C., Gao, R., Li, Y., & Zhang, Q. (2024). A novel hybrid Harris hawk sine cosine optimization algorithm for reactive power optimization problem. Journal of Experimental and Theoretical Artifical Intelligence, 36(6), 901-937.
Kalidass, S., & Palanisamy, P. (2014). Effect of machining parameters on surface roughness in end milling of AISI 304 steel using uncoated solid carbide tools. Australian Journal of Mechanical Engineering, 12(2), 223-232.
Kumar, R., Hynes, J. N. R., Pruncu, C. I., & Sujana, J.J. A. (2019). Multi-Objective optimization of green technology thermal drilling process using grey-fuzzy logic method. Journal of Cleaner Production, 236, Article 117711.
Kumar, R., & Hynes, J.N.R. (2020). Prediction and optimization of surface roughness in thermal drilling using integrated ANFIS and GA approach. Engineering Science and Technology, an International Journal, 23(1), 30-41.
Mary, A.H., Miry, A.H., & Miry, M.H. (2020). An optimal robust state feedback controller for the AVR system-based Harris hawks optimization algorithm. Electric Power Components and Systems, 48(16-17), 684-1694.
Nehri, Y.E., Oral, A., & Toktas, A. (2024). Optimization of machining parameters of AISI 304L stainless steel with the least error method using Taguchi, RSM and ANN. Australian Journal of Mechanical Engineering.
Nwankiti, U.S., & Oke, S.A. (2022). Thermal friction drilling process parametric optimization for AISI 304 stainless steel using an integrated taguchi-pareto–grey wolf-desirability function analysis optimization technique. Indonesian Journal of Industrial Engineering & Management, 3(3), 210-223.
Song, Y., Tan, X., & Mizzi, S. (2020). Optimal parameter extraction of the proton exchange membrane fuel cells based on a new Harris hawks optimization algorithm. Energy Source, Part A: Recover, Utilisation and Environmental Effects, 46(27). 1-18.
Swetha, S.G., Mahapatra, S., & Raj, S. (2021). Voltage constraint using hybrid Harris hawk particle swarm optimizer. Electric Power Components and Systems, 49(4-5), 421-435.
Upputuri, R., Kumar N., & Suresh, C.V. (2024). Optimal power flow using a hybrid improved Harris hawks optimization algorithm-pattern search method. Computers and Computing, 70(3), 2684-2704.
Vaz, M., & Tomiyama, M. (2020). Identification of inelastic parameters of the AISI 304 stainless steel: a multi test optimization strategy. Inverse Problems in Science and Engineering, 28(11), 1551-1569.
Wang, H., Chen, L., Liu, D., Song, G., &Tang, G. (2015). Study on electropulsing assisted turning process for AISI 304 stainless steel. Material Science and Technology, 31(13), 1564-1571.
Zhou, P., Zhang, H. & Liang, W. (2023). Research on hybrid intrusion detection based on improved Harris hawk optimization algorithm. Connection Science, 35(1), Article 2195595.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Bayo Yemisi Ogunmola, Nehemiah Sabinus Alozie, Oluwo Adeyinka, Ugochukwu Sixtus Nwankiti , Sunday Ayoola Oke, John Rajan, Swaminathan Jose
This work is licensed under a Creative Commons Attribution 4.0 International License.
